AutoSense AI Knowledge Base
P0325 Code: Knock Sensor 1 Circuit Malfunction Bank 1
P0325 means the knock sensor circuit is not reporting engine knock information correctly. Learn the common symptoms, causes, severity, and typical repair costs.
The P0325 code means the knock sensor circuit is not reporting engine knock information correctly. It is stored when the engine computer sees a signal or operating condition outside the expected range.
Ignition and misfire codes mean the engine computer detected incomplete combustion or unreliable timing information. The right fix depends on live data, freeze-frame information, service history, and whether other codes are present.
Symptoms
- Check engine light
- Reduced power
- Poor fuel economy
- Pinging or knocking noise
- Timing may be retarded by the ECM
- Sometimes no noticeable symptoms
Common Causes
- Failed knock sensor
- Damaged knock sensor wiring
- Poor connector contact
- Engine mechanical noise
- Incorrect fuel octane or detonation
- ECM issue, less commonly
Severity
Moderate. The engine may protect itself by reducing timing, but unresolved knock detection problems can hide real detonation.
Typical Repair Costs
$150 to $800
- The lower end usually covers inspection, cleaning, wiring repair, or a simple sensor replacement.
- The higher end applies when parts are hard to access or when the code is caused by a larger mechanical, emissions, or transmission problem.
- Always diagnose before replacing parts, because one code can be triggered by several related systems.
Frequently Asked Questions
What does code P0325 mean?
P0325 means the knock sensor circuit is not reporting engine knock information correctly. The exact cause should be confirmed with diagnostic data before replacing parts.
Can I drive with a P0325 code?
It depends on symptoms. If the car runs poorly, overheats, stalls, shifts harshly, or the check engine light flashes, limit driving and diagnose it promptly.
What is the most common fix for P0325?
Common fixes include addressing failed knock sensor, damaged knock sensor wiring, poor connector contact, but testing is needed to avoid replacing the wrong part.
Related Articles
Engine Misfire Symptoms, Causes, and Repair Cost
A misfire happens when one or more cylinders fail to burn fuel correctly, causing shaking, power loss, and potential converter damage.
Poor Fuel Economy: Common Causes and Repair Cost
Poor fuel economy can come from driving conditions, maintenance, sensors, fuel mixture problems, or engine faults.
P0300 Code: Random or Multiple Cylinder Misfire
P0300 means the engine computer detected random misfires across multiple cylinders.
AutoSense AI
Catch Vehicle Problems Before They Become Expensive Repairs
AutoSense AI continuously monitors engine data and helps flag unusual performance patterns before rough running becomes a costly breakdown.
Join the WaitlistPricing and Waitlist
Join the AutoSense AI waitlist.
Get updates on engine health monitoring, anomaly alerts, compatibility details, and launch availability.